Call Us! 1-425-290-3922

Intake/Discharge Accessories

Intake Manifolds, Flex Ducting, and Quick Clamps for OmniAire Machines

Omnitec Design offers a complete assortment of ABS plastic intake manifold adapters, flex duct, and quick clamps to fit all OmniAire Negative Air Machines. Our intake and discharge parts will allow you to quickly set up our machines inside or outside the containment with little effort. We have flex ducting in several sizes and strengths depending on the demands of your application, and the quick clamps to secure it to an intake adapter or the exhaust ring on any OmniAire machine. Omnitec has the parts you need to get the job done right. If you need help in selecting parts and accessories for any Omnitec Design equipment, please contact us.

Breathe easy.

Omnitec Design offers a complete assortment of ABS plastic intake manifold adapters, flex duct, and quick clamps to fit all OmniAire Negative Air Machines. Our intake and discharge parts will allow you to quickly set up our machines inside or outside the containment with little effort.
Flexible Duct
Flex ducts are mylar, wire reinforced and depending on your application, available in several strengths. Flexible duct can be connected to the suction or discharge side of  OmniAire negative air machine. OmniAire machines equipped with Intake manifolds and flex ducting can pull contaminated air from the containment, while operating in clean area. Flex duct can be also attached to the OmniAire exhaust ring to discharge air in to specified area or outdoors.

  • Flex duct is 2-ply material, wire reinforced. It is available in 8″ to 14″ diameter, 25 ft long sections. This duct is used for suction from a containment or discharge from OmniAire machines. Collapses to 3” high stack for storage.
  • Flex duct with fiberglass fibers for extra durability, wire reinforced is available in 10″ to 14″ diameter, 25 ft long – combines light weight with much increased strength. 6” high stack when collapsed
  • PVC hose, wire reinforced, 10″, 12″ and 18″ diameter, 25 ft long – rated @ 10”WC vacuum, it is used as suction hose for vacuum 1” – 6” WC

Consult the specification sheet for your particular machine to determine the flexible duct requirements for intake or exhaust. Other special types sizes not listed can be ordered.

Part # Details Machines
OFD14 Flexible Duct, Wire Reinforced | Flexible – 14”x25’
OARD18 PVC Hose, Wire Reinforced | Flexible – 18”x25’ OARD type, rated for 10”WC vacuum
OAD62 PVC Hose, Wire Reinforced | Flexible – 6”x25’
OAD325 PVC Hose, Wire Reinforced | Flexible – 3”x25’

No products use this part

OAD12R Flex / Fiberglass Duct, Wire Reinforced | Flexible – 12″ x 25′
OAD12 Flexible Duct, Wire Reinforced | Flexible – 12”x25’
OAD10 Flexible Duct, Wire Reinforced | Flexible – 10”x25’
MD8 Flexible Duct, Wire Reinforced | Flexible – 8”x25’
Intake Manifold
18x24 manifoldIntake manifolds are adapters for flex hoses and available for any OmniAire HEPA Negative Air Machine. They are made of durable ABS plastic and allow the machines to operate outside of the containment area and connect to the containment with a flexible hose.Because intake manifolds are available in various sizes and configurations, please refer to the specification sheets for your machine or contact us to determine part numbers.Note: ABS material with UL94V0 fire resistance rating is available for custom orders.