PEROx 1000-3 Air Purifier
The PEROx 1000-3 PG air purifier is a powerful tool at fire and flood restoration projects, mold abatement and for control of VOCs, odor and bio-contaminants. The portable PEROx 1000-3 PG is designed to be connected by flex duct to the exhaust from OmniAire machines or to the intake side of any air mover with up to 2000 CFM output. PEROx 1000-3 PG features two generators that allow selection of low, medium or high output of the air purifying oxidizer plasma and provide versatility and capacity to satisfy a variety of needs.
The PEROx purification process utilizes Ionized Hydro-Peroxides and oxidizer plasma, which rapidly sanitizes the air passing through the unit and continues to seek bio-contaminants in surrounding air and on hard surfaces. This portable unit with dual generators can safely operate in occupied areas and control odors during the restoration projects and the final cleanup process.
Photo Hydro-Ionization (PHI) Technology
The oxidizer plasma generated in the PEROx 1000-3 air purifier cells is made from oxygen and humidity from the air using a process called photo hydro-ionization (PHI). The oxidizer plasma disperses like a gas in the surrounding air and attaches to all surfaces in the containment area rapidly destroying bio-contaminants. Because ionized Hydro-Peroxides are not affected by high temperatures or humidity, PEROx 1000-3 air purifiers with PHI technology can be used in a wide range of applications and environments.
When the job is complete, unused oxides convert back to H20 and O2 within 15 minutes with no chemical residue. This makes the PEROx 1000-3 one of the most environmentally friendly air purifiers on the market. Our purification process constantly occurs in nature and has been used in thousands of HVAC installations with no known health risks.
PEROx 1000-3 PG Applications
PEROx air purifiers provide a multitude of benefits in a wide range of industries. PEROx 1000-3 machines are designed to be used effectively at abatement and remediation sites for odor, VOC and mold control as well as provide sterilization capability after final clean-up. Our air purifiers can also be found in bio-contamination sites such as crime scenes, medical facilities and lab environments to control virus and other dangerous bio-hazards.
|Airflow:||• 850 CFM|
|Weight:||• 38 Lbs.|
|Filtration:||• 16″x24″x1″ MERV-11 Pleated|
|• 16″x24″x1″ Carbon|
|Cabinet:||• Aircraft grade aluminum, closed end rivet construction.|
|Controls:||• Variable Speed Controller|
|• Low/Med/High Output Switch|
• 115VAC/60Hz/7.0 Amps
• x2 Hydro-Peroxide Generators
* Airflows are based on blower manufacturer curves. Different HEPA filters may cause the flow to vary.
Ordering, Parts & Accessories
|To order||Use Part Number|
|OAHPG1000-3||PEROx 1000-3 PG|